India
Search

Product and Business News

  • A$
    {3}

    {1} {2}

    {4}

    Keep Reading
    {0}
  • AMETEK SCP Wins Contracts Worth $7 Million for Submarine Equipment
    AMETEK SCP Wins Contracts Worth $7 Million for Submarine Equipment

    Tuesday, August 20, 2019 3 days ago

    WESTERLY, RI, August 15, 2019 -- AMETEK SCP, a world leader in underwater cable and connector solutions for military and commercial applications, has recently been awarded $7 million dollars in contracts from International partners to provide equipment for nuclear and diesel electric attack submarines. The orders have been split between European and Asian partners.

    Keep Reading
  • CAMECA LAUNCHES EIKOS-UV™, THE WORKHORSE ATOM PROBE MICROSCOPE FOR RESEARCH & INDUSTRY
    CAMECA LAUNCHES EIKOS-UV™, THE WORKHORSE ATOM PROBE MICROSCOPE FOR RESEARCH & INDUSTRY

    Wednesday, August 7, 2019 16 days ago

    MADISON, WI, USA – AMETEK CAMECA, a world leader in scientific instrumentation and metrology solutions, is pleased to announce the release of EIKOS-UV, a new atom probe microscope. EIKOS-UV is a workhorse Atom Probe Microscope with increased ease of use and a low cost of ownership.

    Keep Reading
  • EDAX Launches New OIM Matrix Software Package for EBSD

    Thursday, August 1, 2019 22 days ago

    AMETEK EDAX, Inc., a leader in X-ray microanalysis and electron diffraction instrumentation, has introduced the OIM Matrix™ software package, which brings dynamic diffraction-based Electron Backscatter Diffraction (EBSD) pattern simulations and dictionary indexing capabilities to the EBSD market.

    Keep Reading
  • AMETEK SMP Wallingford Appoints University of Pittsburgh Graduate Hunter Stept as New Process Engineer

    Thursday, August 1, 2019 22 days ago

    High-purity metal strip and wire manufacturer, AMETEK Specialty Metal Products (SMP) Wallingford, is delighted to announce the appointment of Hunter Stept as Process Engineer at its Specialty Metal Products division in Wallingford.

    Keep Reading
  • AMETEK PDS Wichita Service Center Expands Compressor Motor Overhaul Capabilities
    AMETEK PDS Wichita Service Center Expands Compressor Motor Overhaul Capabilities

    Wednesday, July 24, 2019 30 days ago

    WICHITA, KS, July 23, 2019 – AMETEK PDS is continuing the expansion of its overhaul capabilities to now include the MB76A-1 and MB76C-2 Compressor Drive Motors, which are used to power climate control systems in aircrafts (alternate part numbers of 1250151 and 1134104-1).

    Keep Reading
  • AMETEK-VIS-ICM
    AMETEK VIS’ New Intelligent Control Module Enhances Vehicular Functionality Through Visual Programming Logic

    Thursday, July 11, 2019 43 days ago

    AMETEK Vehicular Instrumentation Systems (VIS) — the industry leader in custom dashboard instrument displays for heavy trucks and construction, military and other vehicles — introduces the new Intelligent Control Module (ICM), a user definable module that connects with multiple vehicle systems to enhance control for end users.

    Keep Reading
  • AMETEK AMERON Receives FAA-PMA Approval for Control Knob
    AMETEK AMERON Receives FAA-PMA Approval for Control Knob

    Wednesday, July 10, 2019 44 days ago

    BALDWIN PARK, CA – AMERON MASS Systems, a pioneer in the development of high-performance aerospace and defense components, has received FAA-PMA approval on part number M150-900-027.

    Keep Reading
  • AMETEK AMERON Receives FAA-PMA Approval on Housing Assembly Sensor

    Thursday, July 4, 2019 50 days ago

    BALDWIN PARK, CA – AMERON MASS Systems, a pioneer in the development of high-performance aerospace and defense components, has received FAA-PMA approval on its housing assembly sensor, part number M33370101-2.

    Keep Reading
  • The New Phantom S640 Brings Up to 6Gpx/sec (75Gbps) for Machine Vision Applications
    The New Phantom S640 Brings Up to 6Gpx/sec (75Gbps) for Machine Vision Applications

    Tuesday, July 2, 2019 52 days ago

    WAYNE, NJ, June 28, 2019 – Vision Research, leading manufacturer of Phantom High-Speed cameras, introduces the Phantom S640 to their growing machine vision family. The Phantom S640 leverages the Phantom CMOS sensor used in the popular VEO640 camera and provides up to an astounding 6 Gpx/sec (75 Gbps) of streaming data and images for machine vision applications.

    Keep Reading
  • Drexelbrook Offers New Point Level Measurement Probes with Full 3A Certification
    Drexelbrook Offers New Point Level Measurement Probes with Full 3A Certification

    Monday, June 24, 2019 60 days ago

    HORSHAM, PA – AMETEK Drexelbrook, a world leader in level measurement technology, has expanded its point level measurement offering with the new 700-3201 series of fully 3A certified Capacitance/RF Admittance probes, specifically designed for mid-level to premium point level measurement products within sanitary applications that require 3A approval.

    Keep Reading
  • AMETEK Sensors and Fluid Management Systems Selected to Supply Fuel Gauging System for AVIC XCAC MA700 Regional Turboprop
    AMETEK Sensors and Fluid Management Systems Selected to Supply Fuel Gauging System for AVIC XCAC MA700 Regional Turboprop

    Thursday, June 20, 2019 64 days ago

    PARIS, FRANCE – AMETEK Sensors and Fluid Management Systems (SFMS), the global leader in sensor technology for a broad range of aircraft engine and airframe applications, announced today during a contract signing ceremony at the 53rd Annual International Paris Air Show that it has been selected by AVIC XAC Commercial Aircraft Co., Ltd (AVIC XCAC), a subsidiary of Aviation Industry Corporation of China, Ltd. (AVIC), to supply the fuel gauging system for the MA700 turboprop regional aircraft.

    Keep Reading
  • PARKER Aerospace Selects AMETEK PDS for TX Hydraulic Pump Motor
    PARKER Aerospace Selects AMETEK PDS for T-X Hydraulic Pump Motor

    Friday, June 7, 2019 77 days ago

    WICHITA, KS – AMETEK PDS has been selected by Parker Aerospace Hydraulic Systems Division Europe (HSDE) to provide the Hydraulic Pump Motor for the new U.S. Airforce next generation T-X jet trainer aircraft, which will be jointly produced by the Boeing and Saab companies.

    Keep Reading
  • EDAX Releases 160mm Detector for TEM Analysis
    EDAX Adds a New Detector to the Elite T EDS Analysis System for TEM

    Friday, June 7, 2019 77 days ago

    MAHWAH, NJ, June 5, 2019 – AMETEK EDAX, Inc., a leader in X-ray microanalysis and electron diffraction instrumentation, has added a new 160 mm2 detector to its Elite T Energy Dispersive Spectroscopy (EDS) System for Transmission Electron Microscopes (TEM).

    Keep Reading
  • AMETEK MOCON Launches New AMECare® Performance Services Program for USA Permeation Instruments
    AMETEK MOCON Launches New AMECare® Performance Services Program for USA Permeation Instruments

    Monday, June 3, 2019 81 days ago

    Minneapolis, MN, JUNE 2019 - AMETEK MOCON, the global leader in permeation analyzers, testing, and services has launched a new service program – AMECare® Performance Services — for all USA customers who own MOCON permeation instruments.

    Keep Reading
  • Reading Alloys Appoints Michael Wilkes as New Product Manager, Powders
    Reading Alloys Appoints Michael Wilkes as New Product Manager, Powders

    Friday, May 31, 2019 84 days ago

    ROBESONIA, PENNSYLVANIA – Reading Alloys, a leader in the design, development and production of specialty metal powders and high purity master alloys, is pleased to announce the appointment of Michael Wilkes as its new Product Manager, Powders.

    Keep Reading
  • Extended Data Logging Capabilities with the Crystal XP2i
    Extended Data Logging Capabilities with the Crystal XP2i

    Thursday, May 30, 2019 85 days ago

    SAN LUIS OBISPO, USA – Recording pressure data, or data logging, is increasingly becoming a requirement of many companies. Whether you are testing for long term trends, looking for anomalies, or documenting required tests, having an accurate and reliable pressure recorder is essential.

    Keep Reading
  • Conduct Reliable Hydrostatic Pressure Tests with the XP2i Digital Pressure Gauge
    Conduct Reliable Hydrostatic Pressure Tests with the XP2i Digital Pressure Gauge

    Wednesday, May 22, 2019 93 days ago

    SAN LUIS OBISPO, USA – Within natural gas systems, one of the most important methods to verify the integrity of pipelines is through the hydrostatic pressure test. Designed to test the transmission systems – one of the largest sections in a natural gas system – the hydrostatic test varies on the level of requirements. Depending on local regulations, it may require testing pressure and multiple temperatures in the pipeline for several hours prior to and after a pipe is put into service.

    Keep Reading
  • Creaform’s HandySCAN BLACK and Go!SCAN SPARK Win the Red Dot Awards for Product Design
    Creaform’s HandySCAN BLACK and Go!SCAN SPARK Win the Red Dot Awards for Product Design

    Wednesday, May 22, 2019 93 days ago

    ​Lévis, Canada, May 22, 2019 — Creaform, a worldwide leader in portable and automated 3D measurement solutions and a business unit of AMETEK, today announced that the brand-new HandySCAN BLACKTM and Go!SCAN SPARKTM have won two Red Dot Awards for Product Design.

    Keep Reading
  • Creaform’s HandySCAN BLACK and Go!SCAN SPARK
    Airbus Selects Antavia AMETEK MRO to Provide Wheel and Brake Maintenance on the Beluga XL

    Tuesday, May 21, 2019 94 days ago

    CAMPSAS, FRANCE — Antavia has been selected as the provider of wheels and brakes maintenance for the Airbus Beluga XL. Antavia began providing maintenance services for Airbus oversize transport aircraft, the Super Guppy, in 1992. This support continued when the five strong fleet of BelugaST entered into service. Today, Antavia is proud to announce the continuation of its tailor-made MRO and logistics solutions services to Airbus for the Beluga XL fleet as well.

    Keep Reading
  • Grabner Instruments Launches New Flashpoint Tester MINIFLASH FP Vision
    Grabner Instruments Launches New Flashpoint Tester MINIFLASH FP Vision

    Wednesday, May 15, 2019 100 days ago

    VIENNA, AUSTRIA – With AMETEK Grabner Instruments’ new flash point analyzer, the MINIFLASH FP Vision, safety comes first. The MINIFLASH FP Vision determines the flash point of flammable liquid mixtures according to ASTM D6450 and ASTM D7094. These test methods, with continuously closed-cup, are the safest for flash point testing and their results are rated equivalent to ASTM 93/ISO 2719 Pensky Martens.

    Keep Reading